In a tensile
spring heat treatment and quenching process, the cooling speed should be controlled tensile spring products, in order to obtain high and even hardness and enough hardening layer depth, at the same time reduce the deformation and prevent cracking.
What is the action of tensile spring quenching:
1, steel hardenability: hardenability is also called the hardenability, is refers to under prescribed conditions, the hardening depth and hardness of the steel sample distribution characterized by material performance.
These are the characteristics of steel itself;
2, to stretch the spring products, steel grade requirements for the carbon content is 0.
50% -
0.
75%, manganese element is zero.
50%.
Carbon and manganese are affect the hardenability of elements.
Due to the domestic steel hardenability band wider, quenching oil cooling rate should be according to the condition of low hardenability choice;
3, fast quenching oil is mainly used for thickness or diameter smaller alloy constructional steel and carbon steel spring.
Spring enterprise all hope each heat treatment furnace can deal with more specifications of the spring.
extension spring characteristics test
the spring size including outside diameter, inside diameter, spring wire diameter, free length and tensile length.
In testing is often necessary to test the spring load and stress, this time to consider extension spring free length and the length, is the spring in the no load state and the length of the large tensile condition.
testing tensile spring load the Fs, is will spring allowed to carry the load as a test load;
Stress, tau s is allowed on the spring loaded big stress as a stress test.
But, there will be a deviation in the specific detection, so attention should be paid to the selection of measuring tools and limit deviation of consideration.
In addition, on the basis of load measurement, but also pay attention to the spring stiffness measurement, also is the point at which the deformation per unit load change.
abstract: closely around the circle, so that it can force and stretched, each side around a loop (
循环)
。
the following necessary for a stretch of the spring data:
1, free length, total length, long full circle, since the length of hook circles;
2, control the diameter, outer diameter, inner diameter, the inside diameter of casing;
3, steel wire size wire diameter;
4, materials (
Species, grade)
；
5, laps: the total number of turns and right-handed or left-handed;
6, the end of the form;
7, within the hook load;
8, load rate, deflection, every inch of pounds;
9, tensile length.
Wow, this sounds like a bit of a cruel question, but it is a vitally important question to ask yourself if you are struggling with your leaf spring hardware and you would like to stop the News problem.
The best way to confront your leaf spring hardware problem is to search for a high quality offered by Dongguan Yongqiang spring hardware Co.,Ltd. at Yongqiang Spring Hardware. Take a look!
Dongguan Yongqiang spring hardware Co.,Ltd. might focus its marketing efforts by highlighting its end product—improved technology and increased profits—not its producing methods.
