In a tensile spring heat treatment and quenching process, the cooling speed should be controlled tensile spring products, in order to obtain high and even hardness and enough hardening layer depth, at the same time reduce the deformation and prevent cracking.
What is the action of tensile spring quenching:
1, steel hardenability: hardenability is also called the hardenability, is refers to under prescribed conditions, the hardening depth and hardness of the steel sample distribution characterized by material performance.
These are the characteristics of steel itself;
2, to stretch the spring products, steel grade requirements for the carbon content is 0.
50% -
0.
75%, manganese element is zero.
50%.
Carbon and manganese are affect the hardenability of elements.
Due to the domestic steel hardenability band wider, quenching oil cooling rate should be according to the condition of low hardenability choice;
3, fast quenching oil is mainly used for thickness or diameter smaller alloy constructional steel and carbon steel spring.
Spring enterprise all hope each heat treatment furnace can deal with more specifications of the spring.
:
a number of different terminal device or a 'hook' is used to ensure tensile spring source of tension.
Contrary to the principle of compression spring tension spring.
Compression spring reverse effect at the time of compression and tension spring, a reverse effect at the time of stretching or open.
When tensile spring open on both ends, spring will be trying to bring them back to together.
as compression spring, tension spring is also absorb and store energy.
But I don't like the compression spring most of the tensile spring usually under a certain degree of tension, even in the absence of any load.
This determines the initial tension in the absence of any load, tensile spring coiling of the close degree.
pull at the beginning of the spring tension: the tension equal to open to each other at the beginning of spring and circle the required force, tension in the early spring coiling occurs after forming.
Torsion spring, because of wire material, wire diameter, spring index, electrostatic, lubricating oil, heat treatment, electroplating, make each tensile spring initial produce uneven phenomenon.
The
torsion spring, so the installation specification shall be of pretension to slightly apart some distance between each and circle.
At this time the force needed to become the initial tension.
initial tension = P -
K X l = large load
The spring constant tensile length X
Dongguan Yongqiang spring hardware Co.,Ltd. as one who also teaches operations about how we use our whole operating system as a way to gain advantage and create considerable value and capture value in a sector where, in essence, the environment is quite hostile from a competitive point of view.
Dongguan Yongqiang spring hardware Co.,Ltd. will deliver superior returns to our shareholders by tirelessly pursuing new growth opportunities while continually improving our profitability, a socially responsible, ethical company that is watched and emulated as a model of success.
With innovative technology, our professionals can spend more time focused on strategies that will improve News’s quality and deliver a more positive customers experience.
