Tensile spring design parameters:
indicate the material diameter (
d)
, outer diameter (
D)
The presidents (
Ho)
The work world (
n)
, the location and shape of earring, load (
我p p 1 p 2……)
And the corresponding value (
H1H2……Hj）
If there is early tension, as shown in figure, is on the Po.
testing tensile spring load the Fs, is will spring allowed to carry the load as a test load;
Stress, tau s is allowed on the spring loaded big stress as a stress test.
But, there will be a deviation in the specific detection, so attention should be paid to the selection of measuring tools and limit deviation of consideration.
In addition, on the basis of load measurement, but also pay attention to the spring stiffness measurement, also is the point at which the deformation per unit load change.
tensile spring associated standards:
GB/T_1239 [
1]
。
1 -
2009 _ _ cold roll of cylindrical helical spring technology conditions, part 1: tension spring;
GB / T2087 -
2001 cylindrical spiral tensile spring size and parameters: GB/T 2008 -
1997, etc.
pull at the beginning of the spring tension: the tension equal to open to each other at the beginning of spring and circle the required force, tension in the early spring coiling occurs after forming.
Torsion spring, because of wire material, wire diameter, spring index, electrostatic, lubricating oil, heat treatment, electroplating, make each tensile spring initial produce uneven phenomenon.
The
torsion spring, so the installation specification shall be of pretension to slightly apart some distance between each and circle.
At this time the force needed to become the initial tension.
initial tension = P -
K X l = large load
The spring constant tensile length X
Yongqiang saves time and increases productivity because it's one of the most complete sources of business and contact information.
You get a wide variety of security, durability and manageability options across News. Here’s a link of the brand Yongqiang Spring Hardware.
Using high-quality materials to produce News is one of the most important part during manufacturing.
News is receiving a great positive feedback in the market. And many of our clients are fully satisfied with it.
It is one of the best products available in the market today. News is famous product in many oversees market.
