Special-shaped
spring through what to get metal protective layer:
metal cover a lot of more phyletic, in terms of special-shaped spring, usually use the method of plating for metal protective layer.
Plating layer can not only protect from corrosion, and at the same time can improve the appearance of the special-shaped springs.
Some electroplating metal also can improve the working performance of special-shaped spring, such as to improve the surface hardness, increased wear resistance, improve the thermal stability, prevent rays, corrosion, etc.
But if it's purely for the sake of special-shaped spring corrosion, generally choose the electricity galvanized layer with cadmium plating layer.
Zinc nickel plating special-shaped spring is stable in dry air, almost no change, is not easy to change color.
In humid air will generate a layer or carbon zinc carbonate white film.
This layer of dense membrane can prevent corrosion continue to suffer.
So the galvanized layer for special-shaped spring under the condition of atmospheric corrosion protection layer.
All contact with sulfuric acid, hydrochloric acid, caustic soda solution phase, and in the moist air in the atmosphere in the sulphur trioxide of special-shaped spring, unfavorable use zinc plating.
volute special-shaped spring spiral similar to the role of the conical spiral special-shaped spring, it absorbed energy under pressure is big, because of manufacturing difficulties, only for the special case of limited space.
Plane volute spring coil number is more, the deformation is larger, can store larger energy, much used in the
compression spring and instrumentation in energy storage element.
make a special-shaped spring:
generally is spiral line, and then the breakpoint tangent to draw a circle, build a plane scanning with respect to ok, if you want to spiral is change, below have draft Angle and outline.
Draft Angle is the Angle of input, the contour is to draw a curve for your reference, in the sketch drawing can be, and rule curve, is the change of pitch,
a linear spring forming method, it has the following steps:
in a main shaft centerline on the extension of wire on the orientation of the center of the spindle in the perpendicular to the or basically perpendicular to the direction of the spindle center line, will be three or more radial arrangement of the forming tool to move forward, and make the forming tool collision part brought in from the top of the main shaft of wire rod, its characteristic is that the method also includes the following steps: make a installed on forming tool around the spindle center line of the rotation of the turntable, forming tools needed to make at least a wire contact surface is suitable for the wire forming direction;
And after the above the turntable rotation, through the work of a lot of driving gear drive, the forming tools needed to advance towards an extension of the center line, the number of the drive, more than the number of the forming tool, and used in forming a linear spring around the outside of the main shaft of the centerline of the turntable radial layout.
Most places have a few choices when it comes to leaf spring hardware News distributors, but it can sometimes be difficult to find the right supplier for your needs. The quality of News is critical to leaf spring hardware.
Energetic, optimistic entrepreneurs often tend to believe that sales growth will take care of everything, that Dongguan Yongqiang spring hardware Co.,Ltd. will be able to fund our own growth by generating profits.
Dongguan Yongqiang spring hardware Co.,Ltd. have significantly changed the way customers approach manufacturing. News can still compete if we are willing to change the ways in producing.
